| Posted By |
Message |
| Pages: 1 [2] |
danielleandscott
My new 71 Super Beetle
Member since 5/05 13476 total posts
Name:
Scott
|
Re: If you've renovated your kitchen, what cabinet manufacturer did you use and are you happy with them?
Not sure the exact measurements - I measured the space once and it was 14 feet by 9 feet...and then we also wanted to do a 6 foot peninsula on the same side as the 14 foot wall......
We wanted to spend under $10k for Granite and Cabinets.
Scott
|
Posted 2/3/10 1:01 PM  |
| |
|
Prudential Douglas Elliman Real Estate
Long Island's Largest Bridal Resource | Long Island Weddings |
Sassyz75
Turning a new page
Member since 5/05 9731 total posts
Name:
Dina
|
Re: If you've renovated your kitchen, what cabinet manufacturer did you use and are you happy with them?
Posted by danielleandscott
Not sure the exact measurements - I measured the space once and it was 14 feet by 9 feet...and then we also wanted to do a 6 foot peninsula on the same side as the 14 foot wall......
We wanted to spend under $10k for Granite and Cabinets.
Scott
I would need a better idea of the footage you needed... is that 9 x 14 space do you have an oven? dishwasher? sink? range? window? fridge? Or is that 9 x 14 space all cabinets?
|
| Posted 2/3/10 3:42 PM |
| |
|
Jenn627
Laaaaaaaambert!
Member since 5/08 9818 total posts
Name:
Jenn
|
Re: If you've renovated your kitchen, what cabinet manufacturer did you use and are you happy with them?
Kraftmaid - Consumers.
Our cabinets are OK. Consumers was pretty useless. I pretty much designed our kitchen and we had to have our contractor tweak them (because they're stock cabinets).
I do have to say though that Kraftmaid customer service is outstanding. Really, really good.
I'm tired of griping about my cabinets.  I'm sure some posters are tired of me too.
Definitely, def, def, definitely - price out custom.
|
| Posted 2/3/10 7:53 PM |
| |
|
danielleandscott
My new 71 Super Beetle
Member since 5/05 13476 total posts
Name:
Scott
|
Re: If you've renovated your kitchen, what cabinet manufacturer did you use and are you happy with them?
of course there is appliances.....right now the space is completely gutted
|
| Posted 2/3/10 8:48 PM |
| |
|
NewLIGirl
LIF Infant
Member since 8/08 150 total posts
Name:
|
Re: If you've renovated your kitchen, what cabinet manufacturer did you use and are you happy with them?
Cherry Kraftmaid cabinets - Love them
|
| Posted 2/3/10 10:40 PM |
| |
|
Sassyz75
Turning a new page
Member since 5/05 9731 total posts
Name:
Dina
|
Re: If you've renovated your kitchen, what cabinet manufacturer did you use and are you happy with them?
Posted by danielleandscott
of course there is appliances.....right now the space is completely gutted
Without knowing exact layout- meaning how many feet of uppers you have and how many feet of lowers you have and if there are any windows in that 9 x 14 space- and if so, how big they are.. I would say you have anywhere from 35 to 45 feet of kitchen cabinetry.
That would but you just at or slightly under your budget of 10k- but wouldn't include the granite. It would, however, include installation- which would save you on your contractors end- and is probably $$$ that could go towards the granite. Also- if we did the installation, it's capital improvement so no tax on the cabinetry.
These cabinets would be solid 3/4" construction boxes.. maple/ply boxes, solid maples doors... any color you want- no limitations- stains/glazes are hand mixed and made to order.
cabinets would be custom made for your space- so no wasted space, no fillers.
bunch of other stuff is also included (hardware, all pull outs in base cabinets, soft close drawers, etc etc- you can just look at the page on here to see what's included)...
I
|
| Posted 2/3/10 10:56 PM |
| |
|
danielleandscott
My new 71 Super Beetle
Member since 5/05 13476 total posts
Name:
Scott
|
Re: If you've renovated your kitchen, what cabinet manufacturer did you use and are you happy with them?
Honestly I think it is out of our budget. We wanted to stay under $10k with both cabinets and granite. I have someone to install them....
Thanks for the offer
Message edited 2/3/2010 11:10:26 PM.
|
| Posted 2/3/10 11:07 PM |
| |
|
| Pages: 1 [2] |
